IPG LightWELD Laser Welding & Cleaning System

Consistent, high-quality welding for beginner and experienced operators. LightWELD is a next-level IPG laser welding and cleaning solution.

Effortless Welding With High-Quality Results.

The LightWELD is a Handheld Laser Welding & Cleaning System dramatically improves your welding process with its easy-to-use features and high-quality results.

Unlike traditional welding methods, LightWELD is infinitely easier to operate - providing you with minimal distortion or deformation across a wide range of materials.

The LightWELD Laser Welding & Cleaning Family

Whether it’s welding, post-cleaning, or pre-cleaning, the LightWELD range is a productive solution for all operators.

Extended Range
Welding & Cleaning

Welding & Cleaning

LightWELD 1500 Welding

Welding Capability: Steels
Stainless Steel, Mild Steel, Galvanised Steel 6.35 mm (0.250”)
Stainless Steel, Mild Steel, Galvanised Steel 4 mm (0.160”)

Stainless Steel, Mild Steel, Galvanised Steel 4 mm (0.160”)

Welding Capability: Aluminium 3 & 5 Series
Aluminium (3XXX, 5XXX, series) 6.35 mm (0.250”)

Aluminium (3XXX, 5XXX series) 4 mm (0.160”)

Aluminium (3XXX, 5XXX series)
Welding Capability: Aluminium 6 Series
3.0 mm (0.120”)

Welding Capability: Titanium & Nickel Alloy

Titanium and Nickel Alloys 5 mm (0.200”)

Welding Capability-Copper
Copper 2 mm (0.080”)

Wobble Welding
Up to 5 mm width
Up to 5 mm width
Up to 5 mm width
Cleaning Scan Width
Pre & Post-weld up to 15 mm
Pre & Post-weld up to 15 mm

High Frequency Peak Power for Cleaning
2500 W2500 W
Wire Welding Capability

Presets for Experienced and Beginner Welders.

 LightWELD is suited for operators of all skill levels. Its simple controls and custom preset helps new operators use the system easily, while advanced operators can expertly switch presets for many material thicknesses. 

The LighWELD’s low heat input plus extensive capabilities with materials and thicknesses help all welders increase their productivity, well-quality, and repeatability.

    Effortless Setup and Use.

  • Ergonomic, comfortable, and compact
  • Nozzle tip flexible design for different weld joint types and pre and post-weld cleaning
  • Fast switch from laser to wire welding, and from laser welding and cleaning
  • Single cable for laser power, gas and control connections
  • Plug & Play design
  • Visible and labelled rear connection for quick setup.

LightWELD vs TIG & MIG Welding

  • Speed
  • Quality
  • Experienced operators required
  • part setup
  • Material flexibility
  • Heat affected zone
  • Distortion & Deformation
  • Wobble welding
  • Pre-weld cleaning
  • Post-weld polishing
Traditional Systems
  • Average
  • Depending on operator experience
  • Yes
  • Critical and time-consuming
  • Limited with consumables changes
  • Large
  • High
  • No
  • No
  • No
LightWELD Systems
  • Up to 4X Faster than TIG
  • Consistent, high-quality results
  • No
  • Minimal and Fast
  • Wide range with no set up
  • Small
  • Very Low
  • Yes - up to 5 mm
  • Yes - Removes rust, oxides, oil & grease
  • Yes - Removes soot, debris & discolouration

LightWELD Benefits and Features.

  • Up to 4X faster than TIG welding
  • Low heat input for minimal part distortion or deformation
  • Suitable for a wide range of materials and thicknesses of up to 6.35mm
  • Fast and easy setup with built-in preset capabilities and user-defined modes
  • Cleaning power of up to 2500 w for better welding quality and finishing
  • Key switch control for system security with emergency shutdown button
  • Reduced learning curve with optimised presets 
  • High-quality, consistent results
  • Ccmbines simple and advanced uses for new and experienced operators
  • Pre and post-weld cleaning capabilities 
  • Adjustable laser welding power up to 1500 W
  • Preset and user-defined modes to optimise various material-thickness combinations 
  • Wobble welding controls provides up to 5 mm of additional weld width



Not sure which equipment is right for you?
 Call our knowledgeable engineers at
+61 3 9796 3055