Fibre Laser Cutting Machines

Hymson flat bed fibre lasers from 3.2 × 1.6 m to 14 m beds and 6 to 60 kW. Installed, operator-trained and serviced across Australia and New Zealand by ILS.

Enquire now

Hymson Fibre Lasers, Supported by ILS

Industrial Laser Solutions supplies Hymson flat bed fibre laser cutting machines for sheet metal, from 3.2 × 1.6 m exchange-table machines to 14 m large-format beds, at 6 kW to 60 kW. Every machine is installed, commissioned and operator-trained by our own technicians, and serviced from our Hallam workshop.

Hymson Laser Technology Group builds its laser cutting machines in its own factories in Jiangmen and Changzhou, China. ILS is the official Hymson distributor, with full service across Australia and New Zealand. Raycus or MAX sources come as standard, with IPG sources available across the range.

How thick can each power cut?

Production thickness from Hymson's HF-G cut charts: the thickest material cut at a usable production speed. Thicker cuts are possible on simple parts at lower speed.

Laser powerMild steelStainless steelAluminium
6 kW20 mm12 mm12 mm
12 kW25 mm25 mm25 mm
20 kW40 mm40 mm25 mm
30 kW40 mm30 mm25 mm

Why Hymson Through ILS

A laser is only as good as the support behind it. ILS has installed more than 650 laser machines across Australia since 1998, and every Hymson machine we supply is installed, trained and serviced by our own team.

icon

Listed Manufacturer


Hymson Laser Technology Group, founded 2008 and listed on the Shanghai STAR Market (688559), with 7,000+ employees.


icon

IPG Sources Available


Raycus or MAX as standard, with IPG sources available across the range, installed and serviced by the Australian IPG agent.


icon

Wide Power Range

From 6 kW job-shop machines to 60 kW large-format heavy plate cutting.


icon

Australia & NZ Service


Installation, training, local consumables, cutting head rebuilds and full service across Australia and New Zealand.


Hymson Flat Bed Range

HF-G Series – Exchange Table Fibre Laser

The fully enclosed HF-G is built for job shops and production sheet metal: a hollow, stress-relieved bed, a lightweight drawn-aluminium crossbeam and an exchange table that loads the next sheet while the machine cuts. Available as HF3216G, HF4020G and HF6326G.


 

Laser Power Range

6 kW – 30 kW

 

Cutting Area

3.2 × 1.6 m to 6.3 × 2.6 m

 

Max Acceleration

1.5 G

 

Positioning Speed

Up to 140 m/min

Large Format & Bevel – Heavy Plate Fibre Laser

For heavy fabrication, mining, agricultural and trailer work: 13 m and 14 m cutting beds, 12 kW to 60 kW, and bevel cutting for weld-ready edges in a single pass. IPG-sourced configurations are available.

Ask us about large format →


 

Laser Power Range

12 kW – 60 kW

 

Cutting Area

13 × 2.6 m and 14 × 3.2 m

 

Bevel Cutting

Up to 45°

 

Mild Steel Capacity

Up to 100 mm at 60 kW

HF-C & HF-A – Value Fibre Lasers

An affordable first fibre laser or a second machine for lower volumes. The HF-C has an exchange table on a compact 3.1 × 1.53 m bed and ships in a single 40 ft container; the HF-A is a single-table machine for small footprints.

Ask us about the value range →


 

Laser Power Range

3 kW – 12 kW

 

HF-C Cutting Area

3,100 × 1,530 mm

 

HF-A Bed Sizes

3015 up to 8025

 

Table

Exchange (HF-C) or single (HF-A)

HF-B – High-Power Fibre Laser

For shops cutting thick plate every day: up to 30 kW on beds up to 12 m long, with thermal compensation and full high-temperature protection of the bed. Can be extended with automatic loading, unloading and storage.

Ask us about the HF-B →


 

Laser Power Range

3 kW – 30 kW

 

Bed Sizes

3015 up to 12025

 

Table

Exchange table

 

Automation

Load, unload and storage options

Fibre Laser FAQs

What laser power do I need?

For mostly sheet under 6 mm, 6 kW is plenty. For regular 10–20 mm plate, look at 12 kW or more. Send us your parts and we will recommend a power from real cut times.

Exchange table or single table?

An exchange table loads the next sheet while the machine cuts, so it suits production. A single table costs less and suits lower volumes.

Which laser sources are available?

Raycus or MAX sources come as standard on Hymson machines, with IPG sources available across the range.

What is the warranty?

Hymson's factory warranty: 2 years on the laser source and machine frame, 1 year on the cutting head, chiller, stabiliser and dust collector. Consumables are excluded.

How long from order to cutting?

It depends on the configuration (bed size, power, source and automation). We give you a firm delivery date with your quote.

What does my site need?

Stable three-phase power, compressed air at 7 bar or more (dry and oil-free), cutting gases or an air-cutting system, a level floor and a dust extraction plan. We check your site before installation.








Find the Right Laser.
 With the Right Support


Send us a drawing or tell us what you cut. We will recommend the right Hymson machine and give you real cut times, then install, train and support you at every step.

Enquire Now