Hymson Laser Cutting Machines in Australia

Fibre lasers for sheet, tube and beam, sold, installed and serviced across Australia and New Zealand by Industrial Laser Solutions, the official Hymson distributor.

Talk to us

Who Hymson Is

Hymson Laser Technology Group is a Chinese laser and automation manufacturer, founded in 2008 and listed on the Shanghai STAR Market (stock code 688559). It builds fibre laser cutting machines for sheet, tube and structural beam in its own factories in Jiangmen and Changzhou, and has 7,000+ employees and 11 overseas subsidiaries, including Germany, Italy, Switzerland, the USA and Korea.

In Australia, Hymson machines are sold, installed, operator-trained and serviced by Industrial Laser Solutions, the official Hymson distributor, based in Hallam, Victoria, with full service across Australia and New Zealand.

Already own a Hymson? If your machine came through the previous Australian agent, we can look after it. Hymson owner support →

Why Buy Hymson Through ILS

A machine is only as good as the support behind it. ILS has installed more than 650 laser machines across Australia since 1998, and is the Australian agent for IPG Photonics and Precitec.

Installed & Trained

Installation, commissioning and operator training on your own parts, by ILS technicians.

IPG Sources Available

Raycus or MAX as standard, with IPG sources available across the range.

Local Parts & Rebuilds

A wide local stock of consumables, and cutting head rebuilds and testing in our Hallam workshop.

Compliance Expertise

Laser safety advice from a contributor to Weld Australia’s TGN-SW02 and a member of the Australian laser safety standards committee.

The Hymson Range

Flat Bed Fibre Lasers

Exchange-table and single-table machines for sheet metal, from 3.2 × 1.6 m to 6.3 × 2.6 m at 3 to 30 kW, including the high-speed HF-G series.

View flat bed lasers →

Cutting Area

3.1 × 1.5 m to 6.3 × 2.6 m

Laser Power

3 kW – 30 kW

Acceleration

Up to 1.5 G

Series

HF-G, HF-B, HF-C, HF-A

Large Format & Bevel

13 m and 14 m cutting beds at 12 to 60 kW, with bevel cutting for weld-ready edges on thick plate. Built for heavy fabrication, mining, agricultural and trailer work.

See large format on the flat bed page →

Cutting Area

13 × 2.6 m and 14 × 3.2 m

Laser Power

12 kW – 60 kW

Bevel Cutting

Up to 45°

Mild Steel Capacity

Up to 100 mm at 60 kW

Tube, Pipe & Beam

Tube lasers from Φ5 mm tube to Φ560 mm pipe, three and four-chuck heavy-duty machines, ±45° bevel tube cutting, and the HP series for H-beam and plate on one machine.

View tube and beam lasers →

Tube Range

Φ5 mm to Φ560 mm

Max Tube Weight

Up to 2 tonnes

Section Length

Up to 12 m

Beam Height

Up to 1,500 mm

Automation

Automatic loading, unloading and sheet storage, coil-fed cutting lines and MES/ERP connection, from a single machine to a lights-out cell.

View laser cutting automation →

Load & Unload

Automatic sheet and part handling

Storage

Automatic sheet storage towers

Coil Lines

Cut straight from coil

Industry 4.0

MES and ERP connection

Hymson FAQs

Who sells Hymson lasers in Australia?

Industrial Laser Solutions is the official Hymson distributor. We sell, install, train and service the full Hymson laser cutting range across Australia and New Zealand.

Where are Hymson machines made?

In Hymson’s own factories in Jiangmen (Guangdong) and Changzhou (Jiangsu), China.

What laser sources do Hymson machines use?

Raycus or MAX sources as standard, with IPG sources available across the range.

Who services Hymson machines in Australia?

ILS, from Hallam, Victoria, with full service across Australia and New Zealand.

What is the warranty?

Hymson’s factory warranty: 2 years on the laser source and machine frame, 1 year on the cutting head, chiller, stabiliser and dust collector.

Find the Right Laser.
With the Right Support

Send us a drawing or tell us what you cut. We will recommend the right Hymson machine and give you real cut times, then install, train and support you at every step.

Enquire Now